Large-Format Porcelain and Sintered Stone Fabrication

Arlington Marble cuts, fabricates and installs large-format porcelain slabs and sintered stone, including Dekton and Lapitec, at its facility in Fort Worth. We use these materials for kitchen and bathroom countertops, full-height walls and backsplashes, shower surrounds, fireplace surrounds and outdoor kitchens on projects throughout Dallas-Fort Worth and North Texas.

Porcelain and sintered stone are not fabricated the way granite or quartz is. They are thinner, harder and less forgiving at the cut, and the way an edge, a miter or a cutout is handled determines whether the finished piece looks right and stays intact. If you have been told a porcelain slab cannot be fabricated locally, or have had a project declined, send us the drawings.

Granite, Marble, Quartzite, Porcelain, or Quartz

What these materials are, and how they differ

Porcelain slabs

are large-format porcelain panels, typically 6 mm to 12 mm thick and up to roughly 126 by 63 inches, fired at high temperature with the pattern printed on the surface. They are dense, non-porous and resistant to heat, UV light and staining. Because the pattern is on the face, exposed edges need to be handled thoughtfully, usually by mitering the edge so the face wraps around it.

Sintered stone

(Dekton by Cosentino and Lapitec are the brands we work with most) is made by compacting mineral powders under extreme pressure and heat. The result is similar to porcelain in performance, but typically available in thicker formats (Dekton in 8, 12, 20 and 30 mm; Lapitec in 12, 20 and 30 mm) and, in Lapitec's case, with color running through the full body of the slab. Both are rated for outdoor use and are commonly specified for exterior kitchens and cladding.

Quartz

is a resin-bound engineered stone. It is easier to fabricate and offers a wide color range, but it is not recommended outdoors or for applications with sustained heat, which is where porcelain and sintered stone take over.

ĒCLOS by Cosentino

is a separate category of mineral surface with veining that runs through the slab body. We also fabricate it.


Porcelain slab Sintered stone (Dekton, Lapitec) Quartz
Typical thickness 6 to 12 mm 8 to 30 mm 20 to 30 mm
Pattern Printed on surface Printed or full body (varies by brand and color) Through the body
Heat resistance High High Limited; avoid direct heat
UV and outdoor use Yes Yes No
Exposed edges Usually mitered to wrap the face Mitered or eased, depending on thickness and color body Any standard edge
Typical uses Countertops, walls, showers, fireplaces Countertops, outdoor kitchens, fireplaces, cladding, showers Countertops, vanities
Typical thickness
Porcelain slab

6 to 12 mm

Sintered stone (Dekton, Lapitec)

8 to 30 mm

Quartz

20 to 30 mm

Pattern
Porcelain slab

Printed on surface

Sintered stone (Dekton, Lapitec)

Printed or full body (varies by brand and color)

Quartz

Through the body

Heat resistance

Porcelain slab

High

Sintered stone (Dekton, Lapitec)

High

Quartz

Limited; avoid direct heat

UV and outdoor use

Porcelain slab

Yes

Sintered stone (Dekton, Lapitec)

Yes

Quartz

No

Exposed edges

Porcelain slab

Usually mitered to wrap the face

Sintered stone (Dekton, Lapitec)

Mitered or eased, depending on thickness and color body

Quartz

Any standard edge

Typical uses

Porcelain slab

Countertops, walls, showers, fireplaces

Sintered stone (Dekton, Lapitec)

Countertops, outdoor kitchens, fireplaces, cladding, showers

Quartz

Countertops, vanities

Manufacturer thickness and performance figures vary by brand and color. We confirm the right thickness and format for the application on each project.

Modern minimalist kitchen island with an integrated stone sink in Cosentino Eclos Ivora by Arlington Marble.

Where we use porcelain and sintered stone

What fabrication involves

Porcelain and sintered stone reward careful fabrication and punish shortcuts. A few things we pay attention to on every job:

These details are worked out for the specific project rather than published as a standard, because the right approach depends on the material, the thickness, the design and the site.

Brands and materials

We fabricate porcelain slabs from the major slab lines carried by North Texas suppliers, along with Dekton by Cosentino, Lapitec and Techlam by Levantina. Arlington Marble is a Cambria Premier Partner for quartz and has fabricated Techlam, Lapitec and Dekton on residential and commercial projects.

If the material you want is not something we keep in stock, we help source it. That includes identifying which supplier carries the color and format, arranging slab viewing and confirming availability for the project schedule.

marble countertops near me, stone marble near me, best place to buy quartz countertops near me, cheapest place to get granite countertops, granite remnants near me, Calacatta white quartz
Elegant kitchen with Luce Di Luna quartzite countertops, featuring a durable surface with beautiful natural veining and a cohesive design.

Who this page is for

Frequently asked questions

Can you cut and install porcelain slabs and Dekton?

Yes. Arlington Marble fabricates and installs large-format porcelain and sintered stone, including Dekton and Lapitec, in house in Fort Worth.

Yes. Porcelain and sintered stone are non-porous and heat resistant, which makes them well suited to both. Panel layout, edge details and installation conditions are reviewed for each project.

Both are fired or compacted mineral surfaces with similar performance. Porcelain slabs are usually thinner with a surface-printed pattern. Sintered stone brands such as Dekton and Lapitec come in thicker formats and, in some lines, carry the color through the full body of the slab.

It depends on the project. Porcelain and sintered stone handle heat, UV and outdoor exposure that quartz cannot. Quartz is thicker, easier to edge and offers more color options. We will recommend the better fit for the application.

Yes. Thin porcelain is typically mitered and built up to the desired edge thickness so the pattern wraps the edge. Thicker sintered stone can be used at full thickness.

We fabricate the major porcelain slab lines available through North Texas suppliers. If you have a specific color or brand in mind, send it to us and we will confirm.

Modern kitchen island with a polished Luce Di Luna quartzite countertop, featuring elegant veining and a black base with matching bar stools.

Send us your porcelain or sintered stone project

Plans, elevations, a material selection or a photo of the design intent is enough to start. We will review the fabrication approach, confirm the material and thickness, and estimate the project.
Email Us: [email protected]